Alcatel-Lucent 7750 SR Manual page 1484

Os services guide

Hide thumbs Also See for 7750 SR:

Table of Contents

Related Commands

port ccag-ccag-id.{a | b}[.net-sap]:cc-id

config>router>interface ip-interface-name

This command cross connects a network IP interface to a CCAG SAP using the referenced ccag-id. A

CCAG network IP interface binding is identified by four items; the ccag-id, the CCAG path, the

pairing type and the cc-id. A network IP interface CCAG port binding supports all the available

features as port binding using a Dot1Q virtual interface.

To support cross connection between services and network IP interfaces, the network interface port

command allows the binding of the IP interface to a ccag cc-id. Similar to service CCAG SAPs, the

network IP interface port binding command must reference the ccag-id, the CCA path (.a or .b) and

the cc-id used by the service CCAG SAP on the other CCA path. The pairing type is optional as only

.net-sap is supported.

The no form of the command removes the CCAG binding from the network IP interface.

ccag — The ccag portion of the port binding is required and specifies that the network IP interface is

ccag-id — The ccag-id portion of the port binding is required and specifies which ccag-id the

.a | .b — The .a and .b portion of the port binding is required and is used to define the CCA

.net-sap — The .net-sap portion of the network IP interface CCAG binding is optional and is used to

:cc-id — The :cc-id portion of the port binding is required and specifies the unique cc-id in use by the

binding to a ccag cc-id.

network IP interface must be bound to. The specified ccag-id must exist on the system or the port

binding will fail. The leading dash must be included as a separator between ccag and the ccag-id.

-1 (dash 1) to -8 (dash 8)

bandwidth path the network IP interface will be associated with. The path association must be

specified and .a and .b are mutually exclusive. The .a designation identifies the network IP

interface as being on the Alpha path and the .b designation identifies the network IP interface as

being on the Beta path. The paired SAP using the same cc-id as the bound network IP interface

must be associated with the opposite path. The leading period must be included as a separator

between the ccag-id and the path designator.

explicitly define the pairing type as Net-2-SAP. A cross connection between two network IP

interfaces is not currently allowed. The .net-sap pairing type is assumed and does not need to be

included in the SAP identification. When specified, the leading period must be used as a

separator between the path designator and the pairing type.

CCAG network IP interface port binding and the cross connect SAP on the other path.

7750 SR OS Services Guide