Cisco Nexus 5600 Series Reference page 99

Show Commands
show ipv6 mld local-groups
To display information about the local group membership for Multicast Listener Discovery (MLD), use
the show ipv6 mld local-groups command.
Syntax Description
icmp
if-type
if-number
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about MLD local groups:
switch(config)# show ipv6 mld local-groups
MLD Locally Joined Group Membership for VRF "default"
Group
(*, ff13::0001)
(*, ff13::0002)
(*, ff13::0003)
OL-31626-01
show ipv6 [icmp] mld local-groups [if-type if-number] [vrf {vrf-name | all}]
(Optional) Specifies ICMPv6 commands.
(Optional) Interface type. For more information, use the question mark (?) online
help function.
(Optional) Interface or subinterface number. For more information about the
numbering syntax for your networking device, use the question mark (?) online help
function.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Type Interface
Local Eth2/1
Local Eth2/1
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Last Reported
00:00:55
00:00:46
show ipv6 mld local-groups
MCR-95