Cisco Nexus 5600 Series Reference page 463

Chapter Show Commands
show ipv6 pim vrf
To display information about IPv6 Protocol Independent Multicast (PIM6) by virtual routing and
forwarding (VRF) instance, use the show ipv6 pim vrf command.
Syntax Description
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 by VRF:
switch(config)# show ipv6 pim vrf
switch(config)#
OL-31626-01
show ipv6 pim vrf [vrf-name | all]
(Optional) VRF name. The name can be a maximum of 32 alphanumeric characters
and is case sensitive.
(Optional) Specifies all VRFs.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 pim vrf
459