Cisco Nexus 5600 Series Reference page 12

hardware profile multicast max-limit
hardware profile multicast max-limit
To set the maximum number of entries in the multicast routing table, use the hardware profile multicast
max-limit command.
Syntax Description
max-entries
Command Default
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
6.0(2)N2(1)
Usage Guidelines
A reload is neccessary after configuring the max-limit.
This command does not require a license.
Examples
This example shows how to set the maximum number of entries in the multicast routing table to 3000:
switch(config)# hardware profile multicast max-limit 3000
Warning!!: The multicast and /32 unicast route limits have been changed.
switch(config)#
Related Commands Command
show hardware profile
status
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
8
hardware profile multicast max-limit max-entries
Modification
This command was introduced.
The maximum limit changed from 8000 to 16000.
Any route exceeding the limit may get dropped.
Description
Displays information about the multicast routing table limits.
Chapter
Maximum number of entries in the multicast
routing table. The range is from 0 to 16000.
feature H Commands
OL-31626-01