Cisco Nexus 5600 Series Reference page 292

clear ip pim route
clear ip pim route
To clear routes specific to Protocol Independent Multicast (PIM) for IPv4, use the clear ip pim route
command.
Syntax Description
*
group
source
group-prefix
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to clear the all the routes specific to PIM:
switch(config)# clear ip pim route *
switch(config)#
Related Commands
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
288
clear ip pim route {* | group [source] | group-prefix} [vrf {vrf-name | all | default | management}]
Specifies all routes.
Group address in the format A.B.C.D.
(Optional) Source (S, G) route.
Group prefix in the format A.B.C.D/length.
(Optional) Clears the virtual routing and forwarding (VRF) instance information.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies that all VRF entries be cleared from the multicast routing table.
Specifies that the default VRF entry be cleared from the multicast routing table.
Specifies that the management VRF entry be cleared from the multicast routing table.
Modification
This command was introduced.
Chapter C Commands
OL-31626-01