Cisco Nexus 5600 Series Reference page 355

Nx-os multicast routing command reference

Hide thumbs Also See for Nexus 5600 Series:

Table of Contents

Use the same configuration guidelines for the route-map auto-rp-range that you used when you created

a route map for static RPS.

This command requires the LAN Base Services license.

This example shows how to configure the router as a PIM BSR RP candidate:

switch(config)# ip pim rp-candidate e 2/11 group-list 239.0.0.0/24

This example shows how to remove the router as an RP candidate:

switch(config)# no ip pim rp-candidate

Related Commands

show ip pim rp

Displays information about PIM RPs.

Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference

ip pim rp-candidate