Cisco Nexus 5600 Series Reference page 179

Chapter I Commands
restart igmp
To restart the IGMP process, use the restart igmp command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to restart the process:
switch(config)# restart igmp
Related Commands Command
ip igmp flush-routes
OL-31626-01
restart igmp
Modification
This command was introduced.
Review comment from Vishnu (vthumati), this command is not
supported.
Description
Enables flushing routes when the IGMP process is restarted.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
restart igmp
175