Cisco Nexus 5600 Series Reference page 258

Nx-os multicast routing command reference
Hide thumbs Also See for Nexus 5600 Series:
Table of Contents

Advertisement

ip msdp reconnect-interval
ip msdp reconnect-interval
To configure a reconnect interval for the TCP connection, use the ip msdp reconnect-interval
command. To reset a reconnect interval to the default, use the no form of this command.
Syntax Description
interval
Command Default
The reconnect interval is 10 seconds.
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to configure a reconnect interval for the TCP connection:
switch(config)# ip msdp reconnect-interval 20
This example shows how to reset a reconnect interval to the default:
switch(config)# no ip msdp reconnect-interval
Related Commands
Command
show ip msdp peer
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
254
ip msdp reconnect-interval interval
no ip msdp reconnect-interval [interval]
Reconnect interval in seconds. The range is from 1 to 60. The default is 10.
Modification
This command was introduced.
Description
Displays information about MSDP peers.
Chapter
I Commands
OL-31626-01

Advertisement

Table of Contents
loading

Table of Contents