Ip Igmp Version - Cisco Nexus 5600 Series Reference

ip igmp version

ip igmp version
To configure the IGMP version to use on an interface, use the ip igmp version command. To reset the
IGMP version to the default, use the no form of this command.
Syntax Description
version
Command Default
The version number is 2.
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the IGMP version to use on an interface:
switch(config)# interface ethernet 2/2
switch(config-if)# ip igmp version 3
switch(config-if)#
This example shows how to reset the IGMP version to the default:
switch(config)# interface ethernet 2/2
switch(config-if)# no ip igmp version
switch(config-if)#
Related Commands Command
show ip igmp interface Displays IGMP information about the interface.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
174
ip igmp version version
no ip igmp version [version]
Version number. The number is 2 or 3. The default is 2.
Modification
This command was introduced.
Description
Chapter I Commands
OL-31626-01