Show Commands
show ipv6 pim df
To display information about the designated forwarders (DFs) for IPv6 Protocol Independent Multicast
(PIM6), use the show ipv6 pim df command.
Syntax Description
rp-or-group
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 DFs:
switch(config)# show ipv6 pim df
Bidir-PIM6 Designated Forwarder Information for VRF "default"
RP Address (ordinal)
0001::0001 (7)
Interface
* Lo1
switch(config)#
OL-31626-01
show ipv6 pim df [rp-or-group] [vrf {vrf-name | all}]
(Optional) RP or group address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
RP Metric
[0/0]
DF Address
0::
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Group Range
ff00::/8
DF State DF Metric
Lose
[0/0]
show ipv6 pim df
DF Uptime
00:00:02
MCR-101