Cisco Nexus 5600 Series Reference page 33

Show Commands
show forwarding multicast route
To display information about the IPv4 Forwarding Information Base (FIB) multicast routes, use the
show forwarding multicast route command.
Syntax Description
vrf
vrf-name
all
ip
ipv4
group
group-addr
group-mask
group-prefix
source
source-addr
source-mask
source-prefix
module num
summary
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
OL-31626-01
show forwarding [vrf {vrf-name | all}] [ip | ipv4] multicast route {[group {group-addr
[group-mask] | group-prefix} | source {source-addr [source-mask] | source-prefix} | module
num | vrf {vrf-name | all}] | summary [module num | vrf {vrf-name | all}]}
(Optional) Displays information for a specified virtual routing and forwarding (VRF)
instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Displays information for all VRFs.
(Optional) Specifies IPv4.
(Optional) Specifies IPv4.
(Optional) Specifies an IPv4 multicast group address.
IPv4 multicast group address.
(Optional) IPv4 multicast group address mask.
(Optional) IPv4 multicast group prefix.
(Optional) Specifies an IPv4 multicast source address.
IPv4 multicast source address.
IPv4 multicast source address mask.
IPv4 multicast source prefix.
(Optional) Specifies the module number.
Displays route counts.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show forwarding multicast route
MCR-29