Cisco Nexus 5600 Series Reference page 56

show ip msdp count
show ip msdp count
To display information about Multicast Source Discovery Protocol (MSDP) counts, use the show ip
msdp count command.
Syntax Description
asn
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display MSDP counts:
switch(config)# show ip msdp count
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-52
show ip msdp count [asn] [vrf {vrf-name | all}]
(Optional) Autonomous system (AS) number.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Show Commands
OL-31626-01