Cisco Nexus 5600 Series Reference page 459

Chapter Show Commands
show ipv6 pim rp
To display information about IPv6 Protocol Independent Multicast (PIM) RPs, use the show ipv6 pim
rp command.
Syntax Description
group
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 RPs:
switch(config)# show ipv6 pim rp
PIM6 RP Status Information for VRF "default"
BSR: 0::, uptime: 1d01h, expires: now,
Auto-RP disabled
BSR RP Candidate policy: None
BSR RP policy: None
Auto-RP Announce policy: None
Auto-RP Discovery policy: None
RP: 2001:0db8:0000:abcd::0001, (0), uptime: 1d01h, expires: 0.000000,
priority: 0, RP-source: (local), group ranges:
switch(config)#
OL-31626-01
show ipv6 pim rp [group] [vrf {vrf-name | all}]
(Optional) Group address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
priority: 0, hash-length: 0
ff1e:abcd:def1::/96
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 pim rp
455