Cisco Nexus 5600 Series Reference page 300

clear routing multicast
clear routing multicast
To clear the IPv4 multicast routing table, use the clear routing multicast command.
Syntax Description
ip
ipv4
*
group
source
group-prefix
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
The clear ip mroute command is an alternative form of this command.
This command does not require a license.
Examples
This example shows how to clear the IPv4 multicast routing table:
switch(config)# clear routing multicast *
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
296
clear routing [ip | ipv4] multicast {* | group [source] | group-prefix} [vrf {vrf-name | all | default
| management}]
(Optional) Clears IP commands.
(Optional) Clears IPv4 commands.
Specifies all routes.
Group address in the format A.B.C.D.
(Optional) Source (S, G) route.
Group prefix in the format A.B.C.D/length.
(Optional) Clears the virtual routing and forwarding (VRF) instance information.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies that all VRF entries be cleared from the IPv4 multicast routing table.
Specifies that the default VRF entry be cleared from the IPv4 multicast routing table.
Specifies that the management VRF entry be cleared from the IPv4 multicast routing
table.
Modification
This command was introduced.
Chapter C Commands
OL-31626-01