Cisco Nexus 5600 Series Reference page 113

Show Commands
show ipv6 pim policy statistics neighbor-policy
To display information about the neighbor policy statistics for IPv6 Protocol Independent Multicast
(PIM6), use the show ipv6 pim policy statistics neighbor-policy command.
Syntax Description
if-type
if-number
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 policy statistics:
switch(config)# show ipv6 pim policy statistics neighbor-policy ethernet 2/2
C: No. of comparisions, M: No. of matches
route-map rmap2 permit 10
match ipv6 multicast group ff1e::/128
Total accept count for policy: 2
Total reject count for policy: 0
switch(config)#
OL-31626-01
show ipv6 pim policy statistics neighbor-policy if-type if-number
Interface type. For more information, use the question mark (?) online help function.
Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 pim policy statistics neighbor-policy
C: 0 M: 0
MCR-109