Cisco Nexus 5600 Series Reference page 305

Chapter C Commands
clear ipv6 pim route
To clear routes specific to Protocol Independent Multicast for IPv6 (PIM6), use the clear ipv6 pim route
command.
Syntax Description
*
group-prefix
group
source
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to clear the all the routes specific to PIM6:
switch(config)# clear ipv6 pim route *
switch(config)#
Related Commands Command
show ipv6 pim route
OL-31626-01
clear ipv6 pim route {* | group-prefix | group [source]} [vrf {vrf-name | all}]
Specifies all routes.
Group prefix.
Group address.
(Optional) Source (S, G) route.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name.
Specifies all VRFs.
Modification
This command was introduced.
Description
Displays information about PIM6 specific routes.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
clear ipv6 pim route
301