Cisco Nexus 5600 Series Reference page 386

ipv6 pim bsr rp-candidate-policy
ipv6 pim bsr rp-candidate-policy
To filter IPv6 Protocol Independent Multicast (PIM6) bootstrap router (BSR) Candidate-RP messages
that are based on a route-map policy, use the ipv6 pim bsr rp-candidate-policy command. To disable
filtering, use the no form of this command.
Syntax Description
policy-name
Defaults
None
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.0(3)N1(1)
Usage Guidelines
You can specify the RP and group addresses, and whether the type is Bidir or ASM with the match ipv6
multicast command in a route-map policy.
This command requires the Enterprise Services license.
Examples
This example shows how to filter Candidate-RP messages:
switch(config)# ipv6 pim bsr rp-candidate-policy my_bsr_rp_candidate_policy
This example shows how to disable message filtering:
switch(config)# no ipv6 pim bsr rp-candidate-policy
Related Commands Command
show ipv6 pim rp
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
382
ipv6 pim bsr rp-candidate-policy policy-name
no ipv6 pim bsr rp-candidate-policy [policy-name]
Route-map policy name.
Modification
This command was introduced.
Description
Displays information about PIM6 RPs.
Chapter I Commands
OL-31626-01