Cisco Nexus 5600 Series Reference page 146

clear ip igmp interface statistics
clear ip igmp interface statistics
To clear the IGMP statistics for an interface, use the clear ip igmp interface statistics command.
Syntax Description
ethernet
slot/port
loopback
if_number
port-channel
number
sub_if-number
if-type
if-number
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear IGMP statistics for an interface:
switch# clear ip igmp interface statistics ethernet 2/1
switch#
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
142
clear ip igmp interface statistics [if-type if-number] [ethernet slot/port | loopback if_number |
port-channel number[.sub_if_number]]
(Optional) Specifies the Ethernet interface and the slot number and port number. The
slot number is from 1 to 255, and the port number is from 1 to 128.
(Optional) Specifies the loopback interface. The loopback interface number is from
0 to 1023.
(Optional) Specifies the EtherChannel interface and EtherChannel number. The
range is from 1 to 4096.
(Optional) Subinterface number. The range is from 1 to 4093.
(Optional) Interface type. For more information, use the question mark (?) online
help function.
(Optional) Interface or subinterface number. For more information about the
numbering syntax for your networking device, use the question mark (?) online help
function.
Modification
This command was introduced.
Chapter C Commands
OL-31626-01