Cisco Nexus 5600 Series Reference page 60

show ip msdp policy statistics sa-policy
show ip msdp policy statistics sa-policy
To display information about Multicast Source Discovery Protocol (MSDP) Source-Active (SA)
policies, use the show ip msdp policy statistics sa-policy command.
Syntax Description
peer-address
in
out
vrf
vrf-name
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP SA policies:
switch(config)# show ip msdp policy statistics sa-policy 192.168.1.10 in
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-56
show ip msdp policy statistics sa-policy peer-address {in | out} [vrf {vrf-name}]
IP address of the MSDP peer for the SA policy.
Specifies the input policy.
Specifies the output policy.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Modification
This command was introduced.
Show Commands
OL-31626-01