Cisco Nexus 5600 Series Reference page 30

show forwarding ipv6 multicast route
show forwarding ipv6 multicast route
To display information about the IPv6 multicast routes, use the show forwarding ipv6 multicast route
command.
Syntax Description
vrf
vrf-name
all
group
group
group-addr
source
source
source-addr
module num
summary
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
4.1(3)
Usage Guidelines
This command does not require a license.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-26
show forwarding [vrf {vrf-name | all}] ipv6 multicast route {[group {group | group-addr} |
source {source | source-addr} | module num | vrf {vrf-name | all}] | summary [module num |
vrf {vrf-name | all}]}
(Optional) Displays routes for a specific virtual routing and forwarding (VRF)
instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Displays information for all VRFs.
(Optional) Specifies multicast IPv6 group address.
Multicast IPv6 group address with prefix.
Multicast IPv6 group address.
Specifies multicast IPv6 source address.
Multicast IPv6 source address with prefix.
Multicast IPv6 source address.
(Optional) Specifies module number.
Displays route counts.
Modification
This command was introduced.
Added the group-addr and source-addr arguments.
Show Commands
OL-31626-01