Cisco Nexus 5600 Series Reference page 364

ip pim ssm policy
ip pim ssm policy
To configure group ranges for Source Specific Multicast (SSM) using a route-map policy, use the ip pim
ssm policy command. To remove the SSM group range policy, use the no form of this command.
Syntax Description
policy-name
Command Default
The SSM range is 232.0.0.0/8.
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to configure a group range for SSM:
switch(config)# ip pim ssm policy my_ssm_policy
This example shows how to reset the group range to the default:
switch(config)# no ip pim ssm policy my_ssm_policy
Related Commands Command
show ip pim
group-range
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
360
ip pim ssm policy policy-name
no ip pim ssm policy policy-name
Route-map policy name that defines the group prefixes where this feature is applied.
Modification
This command was introduced.
Description
Displays information about PIM group ranges.
Chapter I Commands
OL-31626-01