Cisco Nexus 5600 Series Reference page 64

show ip msdp sa-cache
show ip msdp sa-cache
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA)
cache, use the show ip msdp sa-cache command.
Syntax Description
source
group
asn
peer peer
detail
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
The show ip msdp route command is an alternative form of this command.
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP SA cache:
switch(config)# show ip msdp sa-cache
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-60
show ip msdp sa-cache [{source [group]} | {group [source]}] [asn] [peer peer] [detail] [vrf
{vrf-name | all}]
Source address for SA cache information.
(Optional) Group address for SA cache information.
(Optional) Autonomous system (AS) number.
(Optional) Specifies the IP address of a peer.
(Optional) Displays detailed information.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Show Commands
OL-31626-01