Cisco Nexus 5600 Series Reference page 266

restart msdp
restart msdp
To restart the Multicast Source Discovery Protocol (MSDP) process, use the restart msdp command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to restart the MSDP process:
switch(config)# restart msdp
Related Commands Command
ip msdp flush-routes
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
262
restart msdp
Modification
This command was introduced.
Description
Enables flushing routes when the MSDP process is restarted.
Chapter R Commands
OL-31626-01