Cisco Nexus 5600 Series Reference page 337

Chapter I Commands
ip pim event-history
To configure the size of the IPv4 Protocol Independent Multicast (PIM) event history buffers, use the ip
pim event-history command. To revert to the default buffer size, use the no form of this command.
Syntax Description
assert-receive
bidir
cli
hello
join-prune
null-register
packet
pim-internal
rp
vrf
size
buffer-size
Command Default
All history buffers are allocated as small.
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
OL-31626-01
ip pim event-history {assert-receive | bidir | cli | hello | join-prune | null-register | packet |
pim-internal | rp | vrf} size buffer-size
no ip pim event-history {assert-receive | bidir | cli | hello | join-prune | null-register | packet |
pim-internal | rp | vrf} size buffer-size
Configures the assert receive event history buffer.
Configures the Bidir event history buffer.
Configures the CLI event history buffer.
Configures the hello event history buffer.
Configures the join-prune event history buffer.
Configures the null register event history buffer.
Configures the packet event history buffer.
Configures the PIM internal event history buffer.
Configures the rendezvous point (RP) event history buffer.
Configures the virtual routing and forwarding (VRF) event history buffer.
Specifies the size of the buffer to allocate.
Buffer size is one of the following values: disabled, large, medium, or small. The
default buffer size is small.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip pim event-history
333