Cisco Nexus 5600 Series Reference page 359

Chapter I Commands
This example shows how to remove an Auto-RP mapping agent:
switch(config)# no ip pim send-rp-discovery ethernet 2/1
Related Commands Command
show ip pim rp
ip pim auto-rp
mapping-agent
ip pim border
OL-31626-01
Description
Displays information about PIM RPs.
Configures a router as an Auto-RP mapping agent.
Configures a router to be on the edge of a PIM domain.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip pim send-rp-discovery
355