Cisco Nexus 5600 Series Reference page 238

clear ip msdp route
clear ip msdp route
Note
Effective with Cisco NX-OS Release 4.0(3), the clear ip msdp route command is not available in Cisco
NX-OS software. [Apolina: Note applies to N7K]
To clear routes that match group entries in the Multicast Source Discovery Protocol (MSDP)
Source-Active (SA) cache, use the clear ip msdp route command.
Syntax Description
*
group
group-prefix
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
4.0(3)
Usage Guidelines
You can also use the clear ip msdp sa-cache command for the same function.
This command requires the LAN Base Services license.
Examples
This example shows how to clear the MSDP SA cache:
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
234
clear ip msdp route {* | group | group-prefix} [vrf {vrf-name | all | default | management}]
Specifies all sources for the group from the SA cache.
Group address in the format A.B.C.D.
Group prefix in the format A.B.C.D/length.
(Optional) Clears the virtual routing and forwarding (VRF) instance information.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies that all VRF entries be cleared from the SA-cache.
Specifies that the default VRF entry be cleared from the SA-cache.
Specifies that the management VRF entry be cleared from the SA-cache.
Modification
This command was introduced.
This command was removed.
Chapter C Commands
OL-31626-01