Cisco Nexus 5600 Series Reference page 206

ip igmp snooping event-history
ip igmp snooping event-history
To configure the size of the IGMP snooping event history buffers, use the ip igmp snooping
event-history command. To revert to the default buffer size, use the no form of this command.
Syntax Description
igmp-snoop-
internal
mfdm
mfdm-sum
rib
vlan
vlan-events
vpc
size
buffer-size
Command Default
All history buffers are allocated as small.
Command Modes
Global configuration mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the IGMP snooping VLAN event history buffer size:
switch(config)# ip igmp snooping event-history vlan size large
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
202
ip igmp snooping event-history {igmp-snoop-internal | mfdm | mfdm-sum | rib | vlan |
vlan-events | vpc} size buffer-size
no ip igmp snooping event-history {igmp-snoop-internal | mfdm | mfdm-sum | rib | vlan |
vlan-events | vpc} size buffer-size
Clears the IGMP snooping internal event history buffer.
Clears the multicast FIB distribution (MFDM) event history buffer.
Clears the MFDM sum event history buffer.
Clears the Routing Information Base (RIB) event history buffer.
Clears the VLAN event history buffer.
Clears the VLAN-event event history buffer.
Clears the virtual port channel (vPC) event history buffer.
Specifies the size of the buffer to allocate.
Buffer size that is one of the following values: disabled, large, medium, or small.
The default buffer size is small.
Modification
This command was introduced.
Chapter I Commands
OL-31626-01