Cisco Nexus 5600 Series Reference page 82

show ip pim policy statistics auto-rp
show ip pim policy statistics auto-rp
To display information about the Auto-RP policy statistics for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim policy statistics auto-rp command.
Syntax Description
rp-candidate-
policy
mapping-
agent-policy
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about IPv4 PIM policy statistics:
switch(config)# show ip pim policy statistics auto-rp rp-candidate-policy
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-78
show ip pim policy statistics auto-rp {rp-candidate-policy | mapping-agent-policy} [vrf
{vrf-name | all | default | management}]
Specifies candidate-RP messages.
Specifies mapping agent messages.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies that all VRF entries be cleared from the IPv4 multicast routing table.
Specifies that the default VRF entry be cleared from the IPv4 multicast routing table.
Specifies that the management VRF entry be cleared from the IPv4 multicast routing
table.
Modification
This command was introduced.
Show Commands
OL-31626-01