Cisco Nexus 5600 Series Reference page 255

Chapter I Commands
ip msdp password
To enable a Multicast Source Discovery Protocol (MSDP) MD5 password for the peer, use the ip msdp
password command. To disable an MD5 password for a peer, use the no form of this command.
Syntax Description
peer-address
password
Command Default
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to enable an MD5 password for a peer:
switch(config)# ip msdp password 192.168.1.10 my_password
This example shows how to disable an MD5 password for a peer:
switch(config)# no ip msdp password 192.168.1.10
Related Commands Command
show ip msdp peer
OL-31626-01
ip msdp password peer-address password
no ip msdp password peer-address [password]
IP address of an MSDP peer.
MD5 password.
Modification
This command was introduced.
Description
Displays MDSP peer information.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip msdp password
251