Cisco Nexus 5600 Series Reference page 390

ipv6 pim flush-routes
ipv6 pim flush-routes
To remove routes when the IPv6 Protocol Independent Multicast (PIM6) process is restarted, use the
ipv6 pim flush-routes command. To leave routes in place, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
The routes are not flushed.
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.0(3)N1(1)
Usage Guidelines
To display whether flush routes are configured, use this command line:
switch(config)# show running-config | include flush-routes
This command requires the Enterprise Services license.
Examples
This example shows how to remove routes when the PIM process is restarted:
switch(config)# ipv6 pim flush-routes
This example shows how to leave routes in place when the PIM process is restarted:
switch(config)# no ipv6 pim flush-routes
Related Commands Command
show running-config
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
386
ipv6 pim flush-routes
no ipv6 pim flush-routes
Modification
This command was introduced.
Description
Displays information about the running-system configuration.
Chapter I Commands
OL-31626-01