Cisco Nexus 5600 Series Reference page 434

show ip pim policy statistics register-policy
show ip pim policy statistics register-policy
To display information about the register policy statistics for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim policy statistics register-policy command.
Syntax Description
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about PIM policy statistics:
switch(config)# show ip pim policy statistics register-policy vrf all
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
430
show ip pim policy statistics register-policy [vrf {vrf-name | all | default | management}]
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Specifies the default VRF.
Specifies the management VRF.
Modification
This command was introduced.
Chapter Show Commands
OL-31626-01