Cisco Nexus 5600 Series Reference page 290

clear ip pim policy statistics
clear ip pim policy statistics
To clear Protocol Independent Multicast (PIM) policy counters, use the clear ip pim policy statistics
command.
Syntax Description
jp-policy
neighbor-
policy
ethernet
slot/port
loopback
if_number
port-channel
number
sub_if-number
vlan
vlan-id
if-type
if-number
register-policy Specifies statistics for the register policy.
bsr
bsr-policy
rp-candidate-
policy
auto-rp
mapping-
agent-policy
vrf
vrf-name
all
default
management
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
286
clear ip pim policy statistics {jp-policy | neighbor-policy} {ethernet slot/port | port-channel
channel-number[.sub_if-number] | vlan vlan-id}
clear ip pim policy statistics register-policy [vrf {vrf-name | all | default | management}]
clear ip pim policy statistics {register-policy | bsr {bsr-policy | rp-candidate-policy} | auto-rp
{rp-candidate-policy | mapping-agent-policy}} [vrf {vrf-name | all}]
Specifies statistics for the join-prune policy.
Specifies statistics for the neighbor policy.
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
(Optional) Specifies the loopback interface. The loopback interface number is from
0 to 1023.
Specifies the EtherChannel interface and EtherChannel number. The range is from 1
to 4096.
(Optional) Subinterface number. The range is from 1 to 4093.
Specifies the VLAN.
VLAN number. The range is from 1 to 4094.
Interface type. For more information, use the question mark (?) online help function.
Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
Specifies the bootstrap protocol RP-distribution policy.
Specifies the statistics for BSR messages.
Specifies the statistics for RP candidate messages.
Specifies the statistics for Auto-RP messages.
Specifies the statistics for mapping agent messages.
(Optional) Clears the virtual routing and forwarding (VRF) instance information.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies that all VRF entries be cleared from the IPv4 multicast routing table.
Specifies that the default VRF entry be cleared from the IPv4 multicast routing table.
Specifies that the management VRF entry be cleared from the IPv4 multicast routing
table.
Chapter C Commands
OL-31626-01