Cisco Nexus 5600 Series Reference page 335

Chapter I Commands
ip pim bsr rp-candidate-policy
To filter IPv4 Protocol Independent Multicast (PIM) bootstrap router (BSR) Candidate-RP messages that
are based on a route-map policy, use the ip pim bsr rp-candidate-policy command. To disable filtering,
use the no form of this command.
Syntax Description
policy-name
Command Default
Disabled
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
You can specify the RP and group addresses, and whether the type is Bidir or ASM with the match ip
multicast command in a route-map policy.
This command requires the LAN Base Services license.
Examples
This example shows how to filter Candidate-RP messages:
switch(config)# ip pim bsr rp-candidate-policy my_bsr_rp_candidate_policy
This example shows how to disable message filtering:
switch(config)# no ip pim bsr rp-candidate-policy
Related Commands Command
show ip pim rp
OL-31626-01
ip pim bsr rp-candidate-policy policy-name
no ip pim bsr rp-candidate-policy [policy-name]
Route-map policy name.
Modification
This command was introduced.
Description
Displays information about PIM RPs.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip pim bsr rp-candidate-policy
331