Cisco Nexus 5600 Series Reference page 154

ip igmp event-history
ip igmp event-history
To configure the size of the IGMP event history buffers, use the ip igmp event-history command. To
revert to the default buffer size, use the no form of this command.
Syntax Description
clis
errors
group-debugs
group-events
ha
igmp-internal
interface-
debugs
interface-
events
msgs
mtrace
policy
statistics
vrf
size
buffer-size
Command Default
All history buffers are allocated as small.
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
150
ip igmp event-history {cli | errors | group-debugs | group-events | ha | igmp-internal |
interface-debugs | interface-events | msgs | mtrace | policy | statistics | vrf} size buffer-size
no ip igmp event-history {clis | errors | group-debugs | group-events | ha | igmp-internal |
interface-debugs | interface-events | msgs | mtrace | policy | statistics | vrf} size buffer-size
Configures the IGMP CLI event history buffer size.
Configures the error event history buffer size.
Configures the IGMP group debug event history buffer size.
Configures the IGMP group-event event history buffer size.
Configures the IGMP HA event history buffer size.
Configures the IGMP IGMP-internal event history buffer size.
Configures the IGMP interface debug event history buffer size.
Configures the IGMP interface-event event history buffer size.
Configures the message event history buffer size.
Configures the IGMP mtrace event history buffer size.
Configures the IGMP policy event history buffer size.
Configures the statistics event history buffer size.
Configures the IGMP VRF event history buffer size.
Specifies the size of the buffer to allocate.
Buffer size that is one of the following values: disabled, large, medium, or small.
The default buffer size is small.
Modification
This command was introduced.
Chapter I Commands
OL-31626-01