Cisco Nexus 5600 Series Reference page 61

Show Commands
show ip msdp route
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA)
cache, use the show ip msdp route command.
Syntax Description
source
group
asn
peer peer
detail
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
The show ip msdp sa-cache command is an alternative form of this command.
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP SA cache:
switch(config)# show ip msdp route
OL-31626-01
show ip msdp route [{source [group]} | {group [source]}] [asn] [peer peer] [detail] [vrf {vrf-name
| all}]
Source address for SA cache information.
(Optional) Group address for SA cache information.
(Optional) Autonomous system (AS) number.
(Optional) Specifies the IP address of a peer.
(Optional) Displays detailed information.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ip msdp route
MCR-57