Cisco Nexus 5600 Series Reference page 244

feature msdp
feature msdp
To enable Multicast Source Discovery Protocol (MSDP), use the feature msdp command. To disable
PIM, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration mode
Supported User Roles
network-admin
VDC administrator
Command History Release
6.0(2)N1(1)
Usage Guidelines
You must enable the MSDP feature before you can configure MSDP.
This command requires the LAN Base Services license.
Examples
This example shows how to enable a MSDP configuration:
switch(config)# feature msdp
switch(config#
Related Commands Command
show
running-configuration
msdp
show feature
ip msdp peer
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
240
feature msdp
no feature msdp
Modified
This command was introduced.
Description
Displays the MSDP running configuration information.
Displays the status of features on a switch.
Configures a MSDP peer.
Chapter F Commands
OL-31626-01