Cisco Nexus 5600 Series Reference page 28

show forwarding distribution multicast route
show forwarding distribution multicast route
To display information about the multicast Forwarding Information Base (FIB) distribution routes, use
the show forwarding distribution multicast route command.
Syntax Description
ip
ipv4
table id
vrf vrf_name
group
group-addr
mask
group-prefix
source
source-addr
source-mask
source-prefix
summary
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command does not require a license.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-24
show forwarding distribution [ip | ipv4] multicast route [table id | vrf vrf_name] [[group
{group-addr [mask] | group-prefix}] [source {source-addr [source-mask] | source-prefix}] |
summary]
(Optional) Specifies IPV4 information.
(Optional) Specifies IPV4 information.
(Optional) Specifies the multicast routing table ID. The range is from 0 to
2147483647.
(Optional) Specifies a virtual routing and forwarding (VRF) name. The name can be
a maximum of 32 alphanumeric characters.
(Optional) Specifies an IPv4 multicast group.
IPv4 multicast group address.
(Optional) Mask for the group address.
(Optional) IPv4 multicast group prefix.
(Optional) Specifies an IPv4 multicast source.
IPv4 source address.
(Optional) Mask for the group address.
(Optional) IPv4 multicast source prefix.
(Optional) Displays the route counts.
Modification
This command was introduced.
Show Commands
OL-31626-01