Cisco Nexus 5600 Series Reference page 29
Nx-os multicast routing command reference
Hide thumbs
Also See for Nexus 5600 Series:
- Configuration manual (378 pages) ,
- Hardware installation manual (100 pages)
Table of Contents
Advertisement
Show Commands
Examples
This example shows how to display information about all the multicast FIB distribution routes:
switch(config)# show forwarding distribution multicast route
IPv4 Multicast Routing Table for table-id: 1
Legend:
C = Control Route
D = Drop Route
G = Local Group (directly connected receivers)
O = Drop on RPF Fail
P = Punt to supervisor
d = Decap Route
(*, 224.0.0.0/4), RPF Interface: NULL, flags: D
(*, 224.0.0.0/24), RPF Interface: NULL, flags: CP
(*, 224.0.1.39/32), RPF Interface: NULL, flags: CP
(*, 224.0.1.40/32), RPF Interface: NULL, flags: CP
(*, 232.0.0.0/8), RPF Interface: NULL, flags: D
OL-31626-01
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 0
Null Outgoing Interface List
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show forwarding distribution multicast route
MCR-25
Advertisement
Table of Contents
