Cisco Nexus 5600 Series Reference page 117

Show Commands
show ipv6 pim statistics
To display information about the packet counter statistics for IPv6 Protocol Independent Multicast
(PIM6), use the show ipv6 pim statistics command.
Syntax Description
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 statistics:
switch(config)# show ipv6 pim statistics
PIM6 Global Counter Statistics for VRF:default, last reset: never
Register processing (sent/received):
BSR processing (sent/received):
Auto-RP processing (sent/received):
OL-31626-01
show ipv6 pim statistics [vrf {vrf-name | all}]
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Registers: 0/0, Null registers: 0/0, Register-Stops: 0/0
Registers received and not RP: 0
Registers received for SSM/Bidir groups: 0/0
Bootstraps: 0/0, Candidate-RPs: 0/0
BSs from non-neighbors: 0, BSs from border interfaces: 0
BS length errors: 0, BSs which RPF failed: 0
BSs received but not listen configured: 0
Cand-RPs from border interfaces: 0
Cand-RPs received but not listen configured: 0
Auto-RP Announces: 0/0, Auto-RP Discoveries: 0/0
Auto-RP RPF failed: 0, Auto-RP from border interfaces: 0
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 pim statistics
MCR-113