show routing ipv6 multicast clients
show routing ipv6 multicast clients
To display information about IPv6 multicast routing clients, use the show routing ipv6 multicast clients
command.
Syntax Description
client-name
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about IPv6 multicast routing clients:
switch(config)# show routing ipv6 multicast clients icmpv6
IPv6 Multicast Routing Client information
Client: icmpv6, client-id: 2, pid: 3742, mts-sap: 282
Shared-memory: icmpv6, wants notifications
Protocol is join-group owner
Join notifications:
Prune notifications:
RPF notifications:
Delete notifications:
Clear mroute notifications: sent 0, fail 0
Add route requests:
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
464
show routing ipv6 multicast clients [client-name]
(Optional) One of the following multicast routing client names:
•
m6rib
•
icmpv6
•
ipv6
•
static
•
pim6
Modification
This command was introduced.
sent 1, fail 0, ack rcvd 1
sent 0, fail 0, ack rcvd 0
sent 0, fail 0, ack rcvd 0
sent 0, fail 0, ack rcvd 0
rcvd 0, ack sent 0, ack fail 0
Chapter
Show Commands
OL-31626-01