Cisco Nexus 5600 Series Reference page 447

Chapter Show Commands
show ipv6 mroute summary
To display summary information about IPv6 multicast routes, use the show ipv6 mroute summary
command.
Syntax Description
count
software-
forwarded
vrf
vrf-name
all
group
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display summary information about multicast routes:
switch(config)# show ipv6 mroute summary
IPv6 Multicast Routing Table for VRF "default"
Total number of routes: 1
Total number of (*,G) routes: 0
Total number of (S,G) routes: 0
Total number of (*,G-prefix) routes: 1
Group count: 0, rough average sources per group: 0.0
OL-31626-01
show ipv6 mroute summary [count | software-forwarded]] [vrf {vrf-name | all}]
show ipv6 mroute {group] summary [software-forwarded] [vrf {vrf-name | all}]
(Optional) Displays only route counts.
(Optional) Displays software-switched route counts only.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Specifies a group address for a route.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 mroute summary
443