Table of Contents
Advertisement
Port Monitor Commands
Description
This command dumps multi-chassis ring data.
sync-database
Syntax
sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application {dhcps |
igmp | igmp-snooping | srrp | sub-mgmt | mld-snooping | mc-ring}] [detail] [type {alarm-
deleted | local-deleted}]
Context
tools>dump>redundancy>multi-chassis
Description
This command dumps multi-chassis sync database information.
Parameters
peer ip-address — Dumps the specified address of the multi-chassis peer.
port port-id — Dumps the specified port ID of the multi-chassis peer.
port lag-id — Dumps the specified Link Aggregation Group (LAG) on this system.
sync-tag sync-tag — Dumps the synchronization tag used while synchronizing this port with the multi-
chassis peer.
application — Dumps the specified application information that was synchronized with the multi-chassis
peer.
Values
detail — Displays detailed information.
alarm-deleted|local-deleted — Filters by entry type.
srrp-sync-data
Syntax
srrp-sync-database [instance instance-id] [peer ip-address]
Context
tools>dump>redundancy>multi-chassis
Description
This command dumps multi-chassis SRRP sync database information.
Parameters
instance-id — Specifies the instance ID.
Values
ip-address — Dumps the specified address (in the form of a.b.c.d).
ima
Syntax
ima
Context
tools>perform
Description
This command allows the use of IMA operations.
Page 456
dhcps, igmp, igmp-snooping, mc-ring, srrp, sub-mgmt, mld-snooping, all
1 — 4294967295
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
