Alcatel-Lucent 7710 SR Configuration Manual page 470

Port Monitor Commands
Packets
Errors
===============================================================================
A:ALA-12>monitor#
===============================================================================
*A:Cpm-A> monitor port bundle-fr-1/1.1
===============================================================================
Monitor statistics for Port bundle-fr-1/1.1
===============================================================================
Input
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
--------------------------------------------------------------------------------Octets
0
Packets
Errors
port (ATM)
Syntax atm [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>port
Description
This command enables ATM port traffic monitoring.
Parameters
interval seconds — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Sample Output
A:ALA-49# monitor port 1/1/1 atm interval 3 repeat 2 absolute
===============================================================================
Monitor ATM statistics for Port 1/1/1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets
Page 442
Output
0
5 seconds
3 — 60
10
1 — 999
0
0
0
0
Input
0
7710 SR OS Interface Configuration Guide
0
0
0
0
Output
0