Alcatel-Lucent 7710 SR Configuration Manual page 408

Port Show Commands
Errors
LLF Admin State
LLF Oper State
Rx S1 Byte
Sample Output
A:ALA-251# show port 1/2/1 detail
===============================================================================
Ethernet Interface
===============================================================================
Description
Interface
Link-level
Admin State
Oper State
Physical Link
IfIndex
Last State Change
Last Cleared Time
Last Cleared Time
Configured Mode
Dot1Q Ethertype
PBB Ethertype
Ing. Pool % Rate
Net. Egr. Queue Pol: default
Egr. Sched. Pol
Auto-negotiate
Accounting Policy
Egress Rate
Load-balance-algo
Down-when-looped
Loop Detected
Sync. Status Msg.
Tx DUS/DNU
SSM Code Type
Configured Address : 00:21:05:7e:b1:48
Hardware Address
Cfg Alarm
Alarm Status
===============================================================================
Traffic Statistics
===============================================================================
Page 380
Label
For ATM, this field displays the number of cells discarded due to
uncorrectable HEC errors. Errors do not show up in the raw cell
counts.
Displays the Link Loss Forwarding administrative state.
Displays the Link Loss Forwarding operational state.
Displays the received S1 byte and its decoded QL value.
: 10/100 Ethernet TX
: 1/2/1
: Ethernet
: up
: down
: No
: 37781504
: 01/03/2008 15:17:00
: 01/03/2008 15:17:01
: 01/03/2008 15:17:01
: network
: 0x8100
: 0x88e7
: 100
: n/a
: false
: None
: Default
: default
: Disabled
: False
: Enabled
: Disabled
: sonet
: 14:30:01:02:00:01
:
Description (Continued)
Oper Speed
Config Speed
Oper Duplex
Config Duplex
MTU
Hold time up
Hold time down
Encap Type
QinQ Ethertype
Egr. Pool % Rate : 100
MDI/MDX
Collect-stats
Ingress Rate
LACP Tunnel
Keep-alive
Retry
Rx Quality Level : 0xa(eec2)
Tx Quality Level : 0xa(eec2)
Input
7710 SR OS Interface Configuration Guide
: 0 mbps
: 100 mbps
: N/A
: full
: 1514
: 0 seconds
: 0 seconds
: null
: 0x8100
: unknown
: Disabled
: Default
: Disabled
: 10
: 120
Output