Table of Contents
Advertisement
queue-frame-based-accounting — This keyword enables frame based accounting on all queues associated
with the port. If frame based accounting is required when an aggregate limit is not necessary, the max
keyword should precede the queue-frame-based-accounting keyword. If frame based accounting must be
disabled, execute agg-rate-limit without the queue-frame-based-accounting keyword present.
host-match
Syntax
host-match dest destination-string [create]
no host-match dest destination-string
Context
config>port>ethernet>access>egr>qgrp
Description
This command configures host matching for the Ethernet port egress queue-group.
The no form of the command removes
Parameters
dest destination-string — Specify a host match destination string up to 32 characters in length.
create — Keyword used to create the host match. The create keyword requirement can be enabled/disabled
in the environment>create context.
queue-overrides
Syntax
queue-overrides
Context
config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
Description
This command enables the context to define optional queue parameter overrides for each queue within the
queue group.
queue
Syntax
queue queue-id [queue-type] [create]
no queue queue-id
Context
config>port>ethernet>access>egr>qgrp>qover
config>port>ethernet>access>ing>qgrp>qover
config>port>eth>network>egr>qgrp>qover
Description
This command associates a queue for use in a queue group template. The defined queue-id acts as a
repository for the default parameters for the queue. The template queue is created on each queue-group
object which is created with the queue group template name. Each queue is identified within the template by
a queue-id number. The template ensures that all queue groups created with the template's name will have
the same queue-ids providing a uniform structure for the forwarding class redirection commands in the SAP
egress QoS policies. The parameters within the template queue will be used as the default settings for each
7710 SR OS Interface Configuration Guide
Interface Configuration
Page 209
Advertisement
Table of Contents
