Table of Contents
Advertisement
n392dte
Syntax
n392dte threshold
no n392dte
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DTE error threshold for the LMI.
Parameters
count — Specify the number of errors that will place the bundle in an operationally down state.
Values
n393dce
Syntax
n393dce count
no n393dce
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DCE monitored event count for the LMI.
Parameters
count — Specify the diagnostic window used to verify link integrity on the DCE interface.
Values
n393dte
Syntax
n393dte count
no n393dte
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DTE monitored event count for the LMI.
Parameters
count — Specify the diagnostic window used to verify link integrity on the DTE interface.
Values
t391dte
Syntax
t391dte keepalive
no t391dte
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DTE keepalive timer value for the LMI.
Parameters
keepalive — Specify the interval in seconds between status inquiries issued by the DTE.
7710 SR OS Interface Configuration Guide
1 — 10
1 — 10
1 — 10
Interface Configuration
Page 247
Advertisement
Table of Contents
