Table of Contents
Advertisement
Description
This command enables the context to configure the egress QoS profile for an MLFR bundle or a Frame
Relay port with FRF.12 UNI/NNI fragmentation enabled.
qos-profile
Syntax
qos-profile profile-id
no qos-profile
Context
config>port>tdm>channel-group>frame-relay>egress
config>port>sonet-sdh>path>frame-relay>egress
Description
This command specifies the ingress or egress QoS profile to be used for the configuration of the egress QoS
parameters of a Frame Relay port with FRF.12 UNI/NNI fragmentation enabled.
The no form of the command removes the parameters from the configuration.
Parameters
profile-id — Specifies the profile number. The value can only be modified if the FR port is shut down.
Values
fragment-threshold
Syntax
fragment-threshold fragment-threshold
no fragment-threshold
Context
config>port>tdm>channel-group>frame-relay>frf.12
config>port>sonet-sdh>path>frame-relay>frf.12
Description
This command sets the maximum length in bytes of a fragment transmitted across a frame relay port with the
FRF.12 UNI/NNI fragmentation enabled.
The no form of this command resets the fragment threshold back to the default value.
Default
128
Parameters
fragment-threshold — Specifies the maximum fragment length, in bytes, to be transmitted across the FRF.12
port.
Values
identifier
Syntax
[no] identifier frf16-link-id-string
Context
config>port>tdm>ds1>channel-group>frame-relay
Description
This command defines the identifier for the FR bundle when used in an MLFR bundle. The no form of this
command resets the value to null.
Default
null
7710 SR OS Interface Configuration Guide
1-128
128-512 bytes
Interface Configuration
Page 277
Advertisement
Table of Contents
