Table of Contents
Advertisement
min-vp-vpi
Syntax
min-vp-vpi value
Context
config>port>sonet-sdh>path>atm
config>port>multilink-bundle>ima>atm
config>port>tdm>ds1>channel-group>atm
config>port>tdm>ds3>atm
config>port>tdm>e1>channel-group>atm
config>port>tdm>e3>atm
Description
This command sets the minimum allowable virtual path identifier (VPI) value that can be used on the ATM
interface for a VPC.
Parameters
value — Specify the minimum allowable VPI value that can be used on the ATM interface for a VPC.
Values
Default
ilmi
Syntax
ilmi [vpi/vci]
no ilmi
Context
config>port>sonet-sdh>path>atm
Description
This command creates an ILMI link PVCC by default on VPI/VCI 0/16. Deleting an ILMI link deletes the
PVCC. ILMI is supported only on ATM interfaces on SONET/SDH paths.
Parameters
vpi/vci — Specifies the PVC identifier (vpi/vci).
Values
egress
Syntax
egress
Context
config>port>sonet-sdh>path>atm>ilmi
Description
This command enables the context to configure egress traffic attributes for the ILMI link.
7710 SR OS Interface Configuration Guide
0 — 4095 (NNI)
0 — 255 (UNI)
0
vpi
0 — 4095 (NNI)
0 — 255 (UNI)
vci
1, 2, 5 — 65535
Interface Configuration
Page 273
Advertisement
Table of Contents
