Alcatel-Lucent 7710 SR Configuration Manual page 216

General Port Commands
The no form of this command removes a port scheduler policy from an egress port or channel. Once the
scheduler policy is removed, all orphaned queues and schedulers revert to a free running state governed only
by the local queue or scheduler parameters. This includes any queues or schedulers with a port-parent
association.
Parameters
port-scheduler-policy-name — Specifies an existing port-scheduler-policy configured in the config>qos
context.
elmi
Syntax elmi
Context config>port>ethernet
Description This command configures Ethernet Local Management Interface (E-LMI)parameters for the Ethernet port.
E-LMI is only supported on Ethernet access ports with Dot1q encapsulation type.
mode
Syntax mode {none | uni-n}
Context config>port>ethernet>elmi
Description
This command configures the the Ethernet LMI mode.
Default
none
Parameters none — Specifies that theE LMI mode is set to none.
uni-n — Specifies that theE LMI mode is set to uni-n.
n393
Syntax n393 [2..10]
no n393
Context config>port>ethernet>elmi
Description This command configures the monitored count of consecutive errors.
Parameters 2 .. 10 — Specifies the monitored count of consecutive errors.
Page 190 7710 SR OS Interface Configuration Guide