Table of Contents
Advertisement
Multilink-Bundle Port Commands
Syntax:
For example:
router1>config>port>ml-bundle> protect-bundle bundle-ima-1/1.1
red-differential-delay
Syntax
red-differential-delay red-diff-delay [down]
no red-differential-delay
Context
config>port>multilink-bundle
Description
This command sets the maximum acceptable differential delay for individual links within a multilink
bundle. The differential delay is calculated as the round-trip differential delay for MLPPP bundles, and as
uni-directional differential delay for IMA bundles.
The no form of this command restores the red-differential-delay defaults.
Default
None
Parameters
red-diff-delay — Specify the maximum red differential delay value.
Values
down — Transition the link that exceeded the differential delay to a down state (for example, remove it
from the multilink bundle from an operational perspective).
short-sequence
Syntax
[no] short-sequence
Context
config>port>multilink-bundle
Description
This command specifies that the Multi-link Point to Point Protocol (MLPPP) bundle should use short (12
bit) sequence numbers instead of the default 24-bit sequence number. This command is only valid for
MLPPP bundles.
The no form of this command disables the short-sequence feature.
Default
no short-sequence
Page 254
bundle-type-slot/mda.bundle-num
bundle-PPP or IMA-slot/mda.bundle-num (Creates an MLPPP or IMA bundle.)
bundle:
keyword
slot:
IOM/MDA slot numbers
bundle-num:
1 — 256
0 — 25 milliseconds for all other bundles
0 — 50 milliseconds for IMA bundles
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
